eufy Robot Vacuum C10 Bundle: Filters, Setup, and Care

Start with the station, then the filters

Your C10 bundle includes two replacement washable filters, so you can keep one clean while the other is in use. Before you run the vacuum, set up the self-empty station. The C10 automatically empties its dust bin into the station's 3L dust bag, which only needs replacing every 60 days. That large capacity means less frequent hands-on emptying, but you still need to care for the filter to maintain suction.

The C10's 2.85-inch ultra-slim body lets it slide under desks and beds, and the edge expansion brush helps clean corners. To keep that performance, establish a simple filter routine from day one.

Setting up your C10 and its filters

1. Place the self-empty station: Choose a spot with clear space around the station so the C10 can dock easily. The station holds a 3L dust bag that needs replacing every 60 days.
2. Install a washable filter: Your bundle includes two replacement washable filters. Insert one into the vacuum according to the user guide. Keep the second as a spare.
3. Run a first cleaning cycle: Let the C10 map and clean. Its point laser and multi-infrared navigation help it avoid obstacles automatically.
4. Check the filter after the first few runs: Inspect the filter for visible debris. If it looks clogged, rinse it according to the care instructions and let it dry completely before reinstalling.

How often should you wash or replace the filter?

There is no single answer for every home, but you can use visible dust and suction performance as guides. The C10's 4,000 Pa suction power depends on airflow, so a clogged filter reduces cleaning effectiveness. The supplied information does not specify a fixed washing interval, so check the filter regularly—especially if you have pets or high dust levels. The bundle's two filters let you rotate: wash one, use the other, and always reinstall only when fully dry.

Replace the filter when it shows wear, tears, or remains clogged after cleaning. The included 2-pack gives you a spare, but if you notice reduced suction that persists after washing, it's time for a new filter.

C10 features that affect filter care

• eufy Robot Vacuum C10 with 2 Replacement Washable Filters: Self-Empty Station: C10's dust bin is automatically emptied into the station's 3L dust bag. Thanks to its large capacity, it only needs replacing every 60 days. Less frequent bin emptying means the filter still handles fine dust; regular filter checks remain important.

  

• eufy Robot Vacuum C10 with 2 Replacement Washable Filters: 2.85-Inch Ultra-Slim Body: C10 features a slim 2.85-inch design, enabling it to reach tighter spaces, including areas under desks and beds. Cleaning under low furniture can stir up more dust, so monitor the filter if you use the C10 in those areas often.
• eufy Robot Vacuum C10 with 2 Replacement Washable Filters: Edge Expansion Brush: The edge expansion brush can help clean corners, improving the coverage ratio of the whole cleaning process. Corner cleaning can collect more debris; a clean filter helps maintain suction in these spots.
• eufy Robot Vacuum C10 with 2 Replacement Washable Filters: Designed for Home with Pets: The strong 4,000 Pa suction power, combined with the rolling brush, sweeps up pet hair, dirt, crumbs, and other messes*. *Actual performance may vary based on the floor type and dust level. Pet hair can clog filters faster; if you have pets, check the filter more often.

A simple maintenance rhythm

Set a reminder to check the filter every couple of weeks. Remove the filter, tap out loose debris, and rinse if needed. Let it air-dry completely—installing a damp filter can damage the vacuum. While the filter dries, use your second filter. Replace the dust bag every 60 days as indicated by the station's capacity. Wipe the sensors and charging contacts with a dry cloth to keep navigation and docking reliable. The C10's point laser and multi-infrared navigation work best when sensors are clean.

By rotating your two washable filters and staying on top of bag replacements, you'll keep your C10 running efficiently without extra hassle.