Volver al blog
Guías prácticas 2026-11-17 eufy - Built with Care | Home Security System & Robovacs 0 vistas

eufy Breast Pump S1 Pro Essential Kit: Contents and First Use

eufy Breast Pump S1 Pro Essential Kit: Contents and First Use

The eufy Wearable Breast Pump S1 Pro Essential Kit bundles the 27 mm flange pump with spare diaphragms, duckbill valves and milk containers. Here's what's inside and how to assemble it for your first session.

What the Essential Kit adds to the S1 Pro

The eufy Wearable Breast Pump S1 Pro Essential Kit is built around the S1 Pro pump itself, paired with a 27 mm flange and a set of spare parts. The kit is designed to keep you pumping without scrambling for replacements when a diaphragm or valve wears out.

The bundle includes the S1 Pro full set with 27 mm flange, a 2-pack of 27 mm flanges, a 2-pack of diaphragms, a 4-pack of duckbill valves, and a 2-pack of milk containers. That means you get the pump plus enough spares to cover typical wear over the first few months.

Kit contents at a glance

  • eufy Wearable Breast Pump S1 Pro Essential Kit with 27 mm Flange: Bundle includes: S1 Pro full set with 27 mm flange, 27 mm Flange (2-Pack), Diaphragm (2-Pack), Duckbill Valves (4-Pack), Milk Container (2-Pack). Knowing exactly what's in the box helps you plan your first assembly and decide whether you need additional parts before your first pumping session.
    eufy Wearable Breast Pump S1 Pro Essential Kit with 27 mm Flange
    eufy Wearable Breast Pump S1 Pro Essential Kit with 27 mm Flange
  • eufy Wearable Breast Pump S1 Pro Essential Kit with 27 mm Flange: Typically, consumable parts last 1-3 months, but we recommend replacing them sooner if you notice decreased suction or performance. This gives you a realistic replacement window and a clear signal for when to swap in the spare diaphragms or valves included in the kit.
  • eufy Wearable Breast Pump S1 Pro Essential Kit with 27 mm Flange: HSA/FSA Eligible: Save with pre-tax health dollars. If you have a health savings or flexible spending account, this kit may be purchased with those funds, which can lower your out-of-pocket cost.

Assembling the 27 mm flange setup for first use

The kit includes the S1 Pro pump and a 27 mm flange, along with spare diaphragms, duckbill valves, and milk containers. Use the following steps to assemble the pump for your first session. Note: the supplied information does not include detailed assembly instructions, so these steps are based on the components provided and common wearable pump assembly principles. Always refer to the manufacturer's manual for specific guidance.

  1. Unpack and identify the parts: Lay out the S1 Pro pump, the 27 mm flange, one diaphragm, one duckbill valve, and one milk container. The kit includes spares, so keep the extras in a clean, dry place for later.
  2. Attach the duckbill valve to the flange: The duckbill valve is a small silicone piece that fits onto the bottom of the flange. It helps control milk flow. Make sure it sits securely and is not twisted.
  3. Insert the diaphragm: The diaphragm is a soft silicone cup that sits on top of the flange. It creates the suction seal. Press it into place so it lies flat.
  4. Connect the milk container: Screw or snap the milk container onto the flange according to the pump's design. Ensure it is securely attached to avoid leaks.
  5. Attach the flange to the pump: Slide the assembled flange onto the pump body. It should click or fit snugly. The pump should be charged before use.

When to replace the spares in your kit

The kit's value is in the spare parts. eufy notes that consumable parts typically last 1–3 months, but you should replace them sooner if you notice decreased suction or performance. That's your cue to swap in a fresh diaphragm or duckbill valve from the kit.

Having spares on hand means you're not caught without a working part mid-session. Keep the spare diaphragms and valves clean and dry, and store them in a sealed container away from direct sunlight.

What the kit does not tell you

The supplied information does not include detailed cleaning instructions, sterilization guidance, or flange sizing advice beyond the 27 mm size. It also does not specify pump suction levels or session duration. For those details, consult the full product manual or a lactation professional.

If you are unsure whether the 27 mm flange is the right size for you, consider speaking with a lactation consultant. The kit includes only 27 mm flanges, so if you need a different size, you may need to purchase it separately.

Artículos relacionados

Customer Service
Inicio
Productos
Carrito
Perfil