Decide what each camera should watch before you mount anything
A two-camera pack works best when each unit has a clear job. Start by walking your property and naming the two areas where a person, vehicle, or package would matter most, such as a driveway and a back door. The Floodlight Camera E340 combines a 3K wide-angle lens with a 2K telephoto lens and an 8x hybrid zoom, so one camera can cover a broad view while the other is aimed at a tighter approach.
The pan-tilt mechanism adds a 360° field of view across the combined wide lens and pan-tilt range. That helps with side-yard angles that a fixed camera would miss, but it does not replace a second camera. Use the second unit to cover a separate approach rather than pointing both at the same spot.
Resolution has a practical limit: maximum resolution is 2K when AI Tracking or Dual Views is active. If you want the highest detail for identification, plan to use those modes selectively rather than as the default for both cameras all night.
What the E340 adds to each placement decision
- Floodlight Camera E340 (2 packs): Dual 2K/3K cameras with 8X hybrid zoom: the 3K wide-angle lens provides a broad field of view, while the 2K telephoto camera captures close-ups and distant details up to 15 m (50 ft) away. Use the wide lens for the overall scene and the telephoto view for the far edge of a driveway or gate, which affects where you aim each of the two cameras.
Floodlight Camera E340 (2 packs) - Floodlight Camera E340 (2 packs): 360° coverage with auto-tracking through the combined ultra-wide lens and pan-tilt mechanism. A corner or soffit position can cover more of a side yard than a flat wall mount, but the camera still needs a clear sweep for the pan-tilt range.
Pair placement tips for two cameras
- Give each camera a different approach: Aim one at the driveway or street-facing approach and the other at a side gate, back door, or porch. Two cameras watching the same path waste the 2-pack.
- Use the telephoto view for distance: The 2K telephoto camera is rated for details up to 15 m (50 ft). Place the camera so the far end of your property falls within that range rather than relying on digital zoom.
- Check the pan-tilt sweep before tightening: The pan-tilt mechanism covers tricky side-yard angles, but a wall or downspout in the sweep can block the view. Test the range before final mounting.
- Keep both units on strong Wi-Fi: The E340 supports 2.4 GHz and 5 GHz networks with Wi-Fi 6. Check signal strength at both proposed locations; a weak spot at the second camera will affect live view and recording.
Set the 2,000-lumen light so it helps rather than blinds
Each E340 includes a 2,000-lumen smart defence light with adjustable brightness, motion-activated illumination, ambient lighting, and a 95dB alarm. The brightness adjustment is the setting to use first: a light that is too bright at a front door can wash out faces and annoy neighbors, while a dim setting may not illuminate a long driveway.
Use motion-activated illumination for the approach you want lit only when someone arrives, and ambient lighting for a low-level glow that helps the camera see without turning night into day. The supplied information does not include recommended brightness levels, detection distances, or schedules, so test each setting at the actual location rather than copying a number from another installation.
The 95dB alarm is a deterrent, not a routine notification. Decide in advance which events should trigger it and keep it reserved for genuine security moments.
A practical setup order for the 2-pack
- Confirm power and network at both spots: The E340 supports 2.4 GHz and 5 GHz Wi-Fi 6 networks. Verify that both mounting locations receive a usable signal before you commit to drilling.
- Choose local storage for 24/7 recording: Continuous recording requires local storage enabled by installing a microSD card up to 128 GB or connecting to eufy HomeBase S380. Decide which option you will use before setup so both cameras record consistently.
- Check HomeBase compatibility: The E340 is compatible with HomeBase S380 with firmware version V3.3.2.6 and above. If you plan to use a HomeBase, confirm the firmware before pairing.
- Mount and aim the first camera: Position the camera for the widest useful view, then use the pan-tilt range to cover the side angle. Set the light brightness and motion behavior for that location.
- Repeat for the second camera with a different job: Use the second unit for the other approach. Keep AI Tracking and Dual Views in mind: maximum resolution is 2K when either is active, so choose those modes where tracking matters more than 3K detail.
Storage and subscription facts that affect both cameras
- Floodlight Camera E340 (2 packs): 24/7 continuous recording with free local storage when a microSD card up to 128 GB is installed or the camera is connected to eufy HomeBase S380. Two cameras recording continuously need a storage plan; decide between cards in each camera and a HomeBase before installation.
- Floodlight Camera E340 (2 packs): No subscription fee for monitoring activities and people. The 2-pack can cover two areas without adding a monthly plan, which matters when budgeting for a whole-property setup.
Checkpoints after both cameras are running
- Both cameras appear in the app and record locally: Confirm that each unit has an active microSD card or HomeBase connection and that 24/7 recording is enabled.
- Light behavior matches each location: Trigger motion at each camera and check that brightness and motion-activated illumination are appropriate for that spot, not just the first one you set up.
- Tracking and resolution choices are intentional: If AI Tracking or Dual Views is on, remember the maximum resolution is 2K in those modes. Decide per camera whether tracking or 3K detail is the priority.
- Wi-Fi holds at both locations: Check live view from each camera at the furthest point of its coverage. If one drops, adjust its position or the network before finalizing.
